Have you ever opened the tap to fill your bathtub only to be taken aback by the shower head’s water
pressure? Unbelievably, this is a rather typical problem. the positive news is that it might be really simple to fix! It only takes identifying the issue and understanding how to fix it.
This specific issue can be brought on by various problems. The most typical problems are an unreliable diverter valve a faulty installation an issue with water flow. Whatever the source, fixing it is not too difficult. It makes no difference if this is your first DIY project or if you are a plumber. This article will describe how to evaluate such issue. Additionally, you’ll discover how to resolve the problem to maintain proper water flow.
Assess the cause before fixing
You should try turning on the showerhead because you already know it leaks water. You should examine
your bathtub faucet while it is running. If it continues to leak, there is a problem with the diverter valve.
Your faucet has to be replaced as soon as you can. If you don’t, this can lead to a water leak behind your
wall, which would be a worse problem. A different approach is to look for variations in water pressure. If you see a difference, an installation error can be the cause. Pipes installed improperly lead to problems with water pressure. However, you have a water flow issue if there is absolutely no water flowing out.
Now that you are aware of the possible problem, how do you resolve it?
Examine the spout on your bathtubYour spout will probably be the primary offender. You won’t need to spend any more time than necessary on this job if the spout is the problem. Furthermore, you won’t have to spend more money than is required. Saving money is fantastic all the time!
Remove the faucet
Bathtub faucets normally come in two varieties: slip-on and screw-on. Both of these techniques require the following:
A hex key or a screwdriver
Verify the screw in the faucet’s base. Depending on the type of screw, grab a flathead, Philips, or hex key.
A knife for putty
You can use a razor blade if you don’t have a putty knife. The caulk between the faucet and the wall can be
removed with this tool. You do not need a putty knife or a razor blade if there is no caulk.
A light source
Seeing the screw under the faucet could be challenging. This will be simpler with the flashlight.
You must find your screw and take it out of your faucet. The caulk between the faucet and the wall will then need to be scraped. You must remove your faucet after you have completed these two simple steps. You can just lift your faucet off the wall if it is a slip-on. If it is a screw-on, you must turn it the other way around. Pull it away from the wall after spinning it five to six times.
Checking Your Bathtub’s Faucet
Turn on the water once you’ve taken the faucet out. Your shower’s spout is the problem if no water is coming out of it. You should examine your sink’s spout for obstructions. A toothpick or a pair of tweezers can be used to clear a blockage if you can see it clearly. If you are unable to remove it, you should get a new bathtub faucet.
Once more, the diverter valve may be the cause of this problem. To direct water to your shower head, you must pull up the diverter valve. It would be simpler to get the new faucet than to fix that component.
Identifying Installation Errors and Water Flow Problems
It’s time to move on if you discover that the problem is not with your faucet.
Checking for installation difficulties is the next thing you must do. Make sure by checking that:
Your bathtub port’s valve is made of pipes that are either 1/2?? copper pipe or 1/2?? galvanized iron pipe.
Any plastic installation pipe needs to be replaced. Both clogging and low water pressure difficulties can be brought on by the plastic tubing.
From the valve spout to the port, there is just one elbow. Remove any additional elbows. Numerous
annoying problems can arise when there are multiple elbows. The valve is properly spaced from the bathtub’s spout. Between 6 and 11 inches should pass beneath the valve for the tub spout. This is your issue if it doesn’t fall within that range. One component that might unintentionally be upside down is the valve body. Simply fix it if it is.
You seek out items for transition.
Replace any transitional pieces in your pipe because these have a lot of negative consequences especially if it’s old or has too many cracks. Rather than taking a chance, just replace the component.
Connect Your New Faucet
Make sure everything is in its proper location first. Make sure you have substituted any transitional elements you had to remove. In the proper manner, turn the faucet back on. Turn it clockwise if it’s a screw-on. Put it up till the end hits the wall if it’s a slip-on. After turning on your faucet, caulk it and allow it to dry. Turn on the water once the caulk has dried. Your showerhead shouldn’t be leaking water, and your water pressure should be improved. See? Easy fix!